Piping and Plant Engineering


Engineering for Industrial Piping Systems

Piping, pressure equipment and supports work together as a system. Changing the pipe route can alter the loads on a pump nozzle. A higher operating temperature affects thermal expansion, while a change in flow rate affects pressure drop. HIGTEC helps you assess how these changes affect your installation. We support the design and verification of industrial plants through pipe stress analysis, pressure vessel calculations and hydraulic analysis.


piping-stress-analysis

Pipe Stress Analysis and Piping Calculations

We use pipe stress analysis to assess how a piping system responds to specified loads. We calculate pipe stresses and displacements, support reactions and loads on equipment nozzles. The analysis accounts for self-weight, pressure and thermal expansion. Where relevant, we also consider wind loads, imposed displacements and specific operating conditions. The results show where the system may need more flexibility, a different support arrangement or a change in pipe routing.



Design Codes and Standards

HIGTEC applies the codes and standards relevant to your installation and project requirements. These include:

  • EN 13480 for the design and strength assessment of metallic industrial piping.
  • ASME B31.3 for process piping in industrial plants.
  • ASME B31.1 for power piping, including piping in power generation and steam systems.
  • EN 13445 and ASME BPVC Section VIII for pressure vessel design and calculations.
  • AD 2000 for technical rules applicable to pressure equipment and piping.
  • Eurocodes EN 1990, EN 1991 and EN 1993 for the structural assessment of steel structures, pipe racks and supports.

Where applicable, we also take account of the European Pressure Equipment Directive (PED 2014/68/EU) and any additional client specifications.




Pressure Vessel

Pressure Vessel and Equipment Engineering

HIGTEC assesses the mechanical design of pressure vessels, columns and heat exchangers. We check wall thicknesses, vessel heads, nozzles, flanges and supports, considering the specified pressure and temperature together with other relevant loads. For unfired pressure vessels, we can carry out design calculations in accordance with NEN-EN 13445. The results help you select materials, verify design choices and identify components that need modification.



Nozzle Loads and Local Stresses

Even when pipe stresses are within allowable limits, the forces and moments on connected equipment can exceed its allowable nozzle loads. Where necessary, we check these loads and assess local stresses around the connections. Branch connections, trunnions and other details may also require a separate assessment. Depending on the geometry and the limits of the calculation method, we use analytical calculations or local finite element analysis (FEA). This allows us to use loads from the overall piping model to assess stresses at critical details.



NOZZLE-FEM

Hydraulic Calculations

Hydraulic Calculations and Flow Analysis

Is the pipe diameter suitable for the required flow rate? What pressure drop should you expect? Can the pump deliver the required flow at the specified head? Our hydraulic calculations assess how pipe diameter, flow velocity and system resistance interact with the pump performance curve. For gas, hydrogen and steam systems, we account for the properties of the fluid and the operating conditions. The assessment can also cover heat loss and pressure transients such as water hammer.



Integrated Piping and Equipment Analysis

Water hammer can impose additional forces on bends and supports. Moving a pipe support can increase the load on a pressure vessel nozzle. When these effects interact, HIGTEC combines hydraulic calculations, pipe stress analysis and mechanical checks on the connected equipment. You can then compare proposed modifications and assess their consequences for the entire installation.



piping-and-equipment

piping

Design Inputs and Calculation Reports

Before starting the analysis, we review the pipe routing, materials, design pressure, temperatures, support arrangements and available equipment data with you. We then agree on the operating cases to assess. Your calculation report sets out the design inputs, assumptions, results and conclusions. Depending on the scope, it also includes support reactions, nozzle loads and proposed design changes. We identify any missing data and document the assumptions used in the calculations.




Discuss Your Piping System with HIGTEC


Are you designing a new installation or modifying existing piping? Send us your piping isometrics, drawings and process specifications. We will review them with you, identify which piping, pressure vessel or hydraulic calculations you need, and prepare a quotation for the agreed scope.